Two meanings on the job. First, a lighter, flexible length of cable, often 10 to 25 feet, connected between the heavy main lead and the stinger or gun so the welder can move easily. Second, the whipping technique used with 6010 and similar rods: flicking the electrode forward out of the puddle and back in a steady rhythm to control heat and keep the keyhole open.
Hook up a fifteen-foot whip so you can reach the bottom of the tank without dragging the 2/0 around.
Also heard as
- whip lead
- whipping
- whip and pause
Related terms
Stinger
Shop name for the electrode holder that grips a stick rod and carries welding current to it.
6010
A deep-digging cellulosic stick rod run on DCEP, the classic choice for open-root pipe passes.
Ground
Shop word for the work lead and its clamp, which completes the welding circuit through the part.
Root pass
The first weld pass in a joint, laid at the root, which sets the quality of everything above it.
Same word, different worlds
Short flexible conduit or cable assembly with wires already in it, linking a fixture or machine to a junction box.
HVAC & RefrigerationThe short length of flexible conduit and wire running from the disconnect to an outdoor unit or air handler.
Ships & SeafaringA simple block and tackle arrangement that doubles the pulling force on a line.